User manual

ZyWAN User Manual Configuring the ZyWAN
© 2008 Arcom Issue D 57
Ethernet configuration
The Ethernet tab looks like this:
The following items must be configured in order to enable one or both of the Ethernet
network connections:
Enable Eth0?, Enable Eth1?
These two settings enable the first and second Ethernet ports available on the ZyWAN.
When the Ethernet port is enabled, the following options may be configured.
After setting all the Ethernet properties, click the Submit New Configuration button
before switching to a new tab or closing the window.
Use DHCP?
If Use DHCP? is set to Yes, the ZyWAN automatically obtains its Ethernet network
address settings from a DHCP server on the LAN. Otherwise, set this parameter to No
in order to configure specific TCP/IP addresses (see below).
If Use DHCP? is set to No, the Ethernet tab looks like this: