User manual

ZyWAN User Manual Configuring the ZyWAN
© 2008 Arcom Issue D 42
Status
The Status tab looks like this:
The Status tab includes several items which give the current status and hardware
configuration. The hardware configuration is done in factory configuration and is
provided here for information.
The screen offers the following fields and options:
Field/Option Explanation
Full Hardware
Model
The Full Hardware Model gives the model number of the
ZyWAN, based on the types of options that were included from
the factory. See ZyWAN model numbers, page 12, for
information on the ZyWAN model numbers based on hardware
configuration.
Current software
version
Current installed version of ZyWAN software.
Hardware Model
The Hardware Model gives the type of cellular modem installed.
Options are indicated as: gprs, 3G, iden, and evdo.
EVDO Provider
Since the EvDO cellular provider has to be specified with the
modem provided with the ZyWAN, this is set as part of the
factory configuration (applies only to ZyWAN-EVDO models).
Options for EvDO provider are: Sprint.
GPS
This option indicates whether or not GPS hardware is installed.
802.11B
This option indicates whether or not an 802.11b WiFi module is
installed.
Last COM Port
This option indicates what is the last available COM port on the
ZyWAN, which is used in all other configuration menus where a
selection of COM ports is allowed. Typically this is COM3.