User manual

ZyWAN User Manual Getting started with your ZyWAN
© 2008 Arcom Issue D 31
An example is shown below of setting the network address to 10.1.30.201 with a
subnet mask of 255.255.0.0:
Browse ZyWAN configuration page
To browse the ZyWAN configuration page:
1 Open a Web browser and enter the address of the ZyWAN into the address bar:
A dialog box is displayed asking for the username and password.
2 Enter your username and password. The ZyWAN configuration page is displayed.
See Configuring the ZyWAN, page 34, for further instructions on configuration.