User manual

ZyWAN User Manual Getting started with your ZyWAN

Power connection

The ZyWAN can be powered from 10-30 VDC. Power to the ZyWAN is supplied via the

4-pin power socket (mating connector: Kycon KPPX-4P plug). The pin configuration is

as follows:

Pin Signal Name

1 + Power

2 Ignition sense

3 - Power (GND)

4 GND

The ignition sense input is intended for sensing the on/off condition of a vehicle’s

ignition, but is not yet supported in the ZyWAN application software.

Ethernet LAN connection

The pin assignments for the Ethernet LAN connection are as follows: The yellow LED

is a Link/Activity light, which illuminates when a 10/100Base-T connection is made, and

flashes when there is data activity. The green LED illuminates when a 100 MB/s

connection is made.

Pin Signal Name

1 Transmit +

2 Transmit -

3 Receive +

4 Reserved

5 Reserved

6 Receive -

7 Reserved

8 Reserved