Datasheet

indicators
79
LED Lamps and LED Lampholders - Sealed to IP67
LED Lampholders can be supplied with or without LEDs
tel: [phone] • Arcolectric • email: [e-mail]
Properties
Sealing
O-ring sealing equivalent to IP67, of both the LED to bezel, and bezel to panel is
available where shown.
Polarity
The nylon base mouldings are polarity marked.
Body Material and Finish
Chromed brass or Black oxide coated brass.
Lampholders only
Items prefixed ‘A’ are supplied without LEDs.
LED wires or PVC covered wire leads
125mm min length wires, 6.3mm standard strip.
Alternative colours, length and strip available.
DIMENSIONS (mm)
Ø 10.0
13.4
2.9
17.9
1.0
Ø 9.5
11.0
2.0
15.5
1.0
Ø10.0
13.4
2.9
17.9
1.0
Ø 9.5
11.0
2.0
15.5
1.0
W
LED fitted
A
LED
not fitted
W
LED fitted
A
LED
not fitted
5mm LED
5mm LED
5mm LED with focusing reflector
5mm LED with focusing reflector
L
LED &
Wires fitted
L
LED &
Wires fitted
8.0
5.5max
T85
8.0
5.5max
T85
8.0
7.0max
T85
8.0
7.0max
T85
To create a catalogue number:
Refer to the 2 columns below (terminal and type), then state: LED colour and
voltage and body finish (Black or Chrome).
Colours: Red, Yellow Green and Blue LEDs.
(High Intensity is standard. Option of extra super bright).
Voltages: LEDs are available for direct connection to 2.0/2.2V or 12Vdc.
For other voltages contact sales.
TYPETERM
PANEL
& ˚C
៉ IP67 front bezel sealing
៉ LED lampholders
៉ Supplied with or without LEDs
៉ Black or Chrome finish
(W) 1048 OA
L 1048 OA
(W) 1050 OA
L 1050 OA
DC
DC
AC
D
AC
DC
AC
DC
AC
D
APPROVAL
ILLUM’N
OPTIONS
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:49 Page 79