User's Manual

5634BIF User’s Manual
35
S-Register Range Default Description
S23
62
General Bit Mapped Options Status
Indicates the status of command options
Bits 1¡ÐGrant RDL
0=RDL not allowed (&T5)
(Default)
1=RDL allowed(&T4)
Bits 1-3¡ÐDTE Rate
0= 0-300 bps
1= 600 bps
2= 1200 bps
3= 2400 bps
4= 4800 bps
5= 9600 bps
6= 19200 bps
7=38400 bps or higher (Default)
Bits 4-5¡ÐAssumed DTE parity
0= even
1= not used
2= odd
3= none (Default)
Bits 6-7¡ÐGuard tone (&Gn)
0= None(&G0) (Default)
1= None (&G1)
2= 1800 Hz (&G2)
S25
0-255
1/100
seconds
5
DTR delay
Register S25 determines how long the modem
waits to hang up after the Data Terminal Ready
signal goes from ON to OFF, if &D2 is in effect .
S26
0-255
1/100
seconds
1
RTS/CTS delay
Register S26 determines how long the modem
waits after the Request to Send signal goes
from ON to OFF before asserting the Clear to
Send signal.