User's Manual

5634RCS User’s Manual

This section provides recommended initialization strings for various conditions for those

models that are included in this manual. Please be advised that these recommended

initial strings were produced by our technicians for general usage only. If you want your

modem to perform specific operations, it is your responsibility to find out what the software

packages or the on-line service requires and go over this manual to find the necessary

commands to enable or disable features on the modem. If you are unable to find a

proper initialization string for your modem, please have the software company or the

service provider contact us. We will try to work out a recommended initialization string

for you. Thank you.

A recommended initialization string for general purpose data communications:

5634RS AT&F&C1&D2&K3\N3%C3

Recommended initialization to turn off error-correction, data-compression and flow-control

as required by many of the banking software. Some software also requires numeric

response instead of word response.

5634RCS AT&F%C0\N0&Q0+MS=*

Note

: Add

V0\V0

to the end of the initialization string if numeric response is required.

Usually, you will need to tell the modem to start its negotiation at a particular speed.

Please go back to the section in chapter 5 that tells you about your +MS command

and set the value accordingly.

Recommended initialization string for some modem-to-modem games:

5634RCS AT&F&C1&D2&K3\N3%C3