User's Manual

5634RCS User’s Manual
6
1.7 Connecting to your telephone
Your modem is so convenient. It provides a second modular telephone jack that lets you
connect your telephone to the same telephone line the modem is using. This lets you
manually dial data calls or make voice calls when you are not using your modem.
Use the following procedure to connect your telephone to your modem:
1. Connect the telephone's modular cord into the
PHONE
jack on the back of your
modem (see figure 1-1).
2. Lift your telephone's handset and listen for a dial tone.
1.8 Connecting to an AC outlet
Use the following procedure to connect your modem to an AC outlet:
1. Insert the supplied power cable into the round AC-IN connector next to the POWER
switch on the back of the modem (see figure 1-1).
2. Plug the end with the power pack into either a 110 or 220 VAC outlet.
3. Turn the POWER switch to ON position, then the MR LED goes on.
4. Turn on the computer or terminal connected to the modem.
1.9 Using a external MIC and speaker
1
If you want to use an external MIC or speaker instead of using the built-in speaker, you
need to insert your external MIC or speaker cable into the round MIC or speaker
connector. After you’ve inserted the external MIC or speaker, the default built-in speaker
will be disabled.
SPEAKER
MICROPHONE
MI
C
SP
K
Figure 1-2 Side view of the modem
1.10 Verifying your connection
Before proceeding, make sure your connection matches the one shown in Figure 1-3.
1
If you modem is shipped without speakerphone function, the MIC and speaker will not work in your system. You
can record and playback your voice messages via the handset.