User's Manual

5634RCS User’s Manual
45
S-
Register
Range Default Description
S36
Bit
Mapped
Bit 0-2
07, hex
LAPM Failure Control
This value indicates what should happen
upon a LAPM failure.
0 Modem disconnect.
1 Modem stays on-line and direct mode
connection is established.
3 Modem stays on-line and a normal
mode connection is established.
4 An MNP connection is attempted and
if it fail, the modem disconnects.
5 An MNP connection is attempted and
if it fails a direct mode connection is
established.
7 An MNP connection is attempted
and if it fails a normal mode
connection is established. (Default)
S37
Bit
Mapped
Desired Line Connection Speed
Register S37 is bit-mapped and provides
the following functions.
0 Attempt automode connection. If N0 is
active, connection is attempted at the
most recently sensed DTE speed. If N1
is active ,connection is attempted at the
highest possible speed. (Default)
1-3 Attempt a 300 bps connection
5 Attempt a V.22 1200 bps connection
6 Attempt a V.22bis 2400 bps
connection
7 Attempt a V.23 connection
8 Attempt a V.32bis 4800 bps
connection
9 Attempt a V.32bis 9600 bps
connection
10 Attempt a V.32bis 12000 bps
connection
11 Attempt a V.32bis 14400 bps
connection
12 Attempt a V.32bis 7200 bps
connection