User's Manual

5634RCS User’s Manual
44
S-
Register
Range Default Description
S30
0-255
tens of
seconds
0
(disable)
Disconnect Inactivity Timer
Sets the length of time , in tens of seconds,
that the modem will stay online before
disconnecting when no data is sent or will
reset the timer. The timer is inoperative in
synchronous mode.
S31
194
BIT Mapped Options Status
Bit 0
¡Ð
Single line connect message
enable/disable(\Vn)
0=Message controlled by
S95, Wn and Vn (\V0)(Default)
1= Single line connect
message (\V1)
Bit 1
¡Ð
Auto line speed detection (Nn)
0= Disabled (N0)
1= Enabled (N1) (Default)
Bits 2-3
¡Ð
Error correction progress
messages (Wn)
0= DTE speed only (W0)
(Default)
1= Full reporting (W1)
2= DCE speed only (W2)
Bits 4-5
¡Ð
Caller ID(#CID)
0=Caller ID disabled
(#CID=0) (Default)
1=Short (formatted) Caller ID
enabled (#CID=1)
2=Long (unformatted) Caller
ID enabled (#CID=1)
Bits 6-7
¡Ð
Reserved
S32
0 - 255 11, hex
Sets the value of the XON character
S33
0 - 255 13, hex
Sets the value of the XOFF character