User's Manual

5634RCS User’s Manual
41
S-
Register
Range Default Description
S23
62
General Bit Mapped Options Status
Indicates the status of command options
Bits 1
¡Ð
Grant RDL
0=RDL not allowed (&T5)
(Default)
1=RDL allowed(&T4)
Bits 1-3
¡Ð
DTE Rate
0= 0-300 bps
1= 600 bps
2= 1200 bps
3= 2400 bps
4= 4800 bps
5= 9600 bps
6= 19200 bps
7=38400 bps or higher
(Default)
Bits 4-5
¡Ð
Assumed DTE parity
0= even
1= not used
2= odd
3= none (Default)
Bits 6-7
¡Ð
Guard tone (&Gn)
0= None(&G0) (Default)
1= None (&G1)
2= 1800 Hz (&G2)
S25
0-255
1/100
seconds
5
DTR delay
Register S25 determines how long the
modem waits to hang up after the Data
Terminal Ready signal goes from ON to
OFF, if &D2 is in effect.
S26
0-255
1/100
seconds
1
RTS/CTS delay
Register S26 determines how long the
modem waits after the Request to Send
signal goes from ON to OFF before
asserting the Clear to Send signal.