User's Manual

5634RCS User’s Manual
38
S-
Register
Range Default Description
S14 General Bit Mapped Options Status
Bit 0
¡Ð
This bit is ignored.
Bit 1
¡Ð
Command echo (En)
0= Disabled (E0)
1= Enabled (E1) (Default)
Bit 2
¡Ð
Quiet mode (Qn)
0= Send result codes
(Q0)(Default)
1= do not send result code (Q1)
Bit 3
¡Ð
Result codes(Vn)
0= Numeric
1= Verbose (V1) (Default)
Bit 5
¡Ð
Tone(T)/Pulse(P)
0= Tone(T) (Default)
1= /Pulse(P)
Bit 7
¡Ð
Originate/Answer
0= Answer
1= Originate (Default)
S16 General Bit Mapped Test Options Status
Bit 0
¡Ð
Local analog loopback
0= Disabled (Default)
1= Enabled (&T1)
Bit 2
¡Ð
Local digital loopback
0= Disable(Default)
1= Enable(&T3)
Bit 3
¡Ð
Remote digital loopback (RDL)
status
0= Modem not in RDL(Default)
1= RDL in progress
Bit 4
¡Ð
RDL required(AT&T6)
0= RDL not requested(Default)
1= RDL requested
Bit 5
¡Ð
RDL with self test
0= Disabled (Default)
1= Enabled(&T7)
Bit 6
¡Ð
Local analog loopback (LAL)with
self test
0= Disabled (Default)
1= Enabled(&T8)
Bit 7
¡Ð
Not used