User's Manual
5634RCS User’s Manual
32
Table 5-3. MNP 10 commands
MNP 10
Commands
Description
-Kn MNP extended service
This command enables or disables conversion of a V.42 LAPM
connection to an MNP 10 connection.
0 Disables V.42 LAPM to MNP 10 conversion. (default)
1 Enables V.42 LAPM to MNP 10 conversion
2 Enables V.42 LAPM to MNP 10 conversion; inhibits MNP
extended services initiation during V.42 LAPM answer mode
detection phase
-SEC=n
0 Disable MNP 10EC
1 Enable MNP 10EC and set transmit level <tx level> 0 to 30 (0
dBm to -30 dBm)