User's Manual

5634RCS User’s Manual
14
Table 2-1. Modem responses
Word Response Number
Response
Meaning
OK 00 Modem successfully executed a command
line.
CONNECT 01 If X0 is in effect, modem made a data
connection at 0-300,1200, 2400, 9600,
19200bps, Otherwise modem made a data
connection at 0-300 bps.
RING 02 Modem detected an incoming ring.
NO CARRIER 03 Remote carrier signal not detected.
ERROR 04 You typed an invalid command line, a
checksum error occurred, or your command
line is too long.
CONNECT 1200 05 Modem made a 1200bps data connection.
NO DIALTONE 06 Modem has not detected a dial tone. (this
response is enabled when X2, X4 or the W
dial modifier is in effect.
BUSY 07 Modem detected a busy signal. (this
response is enabled when X3 or X4 is in
effect.
NO ANSWER 08 Modem did not detect silence when dialing a
command line containing the @ dial modifier.
CONNECT 600 09 Modem made a data connection at 600bps. *
CONNECT 2400 10 Modem made a data connection at 2400bps.
*
CONNECT 4800 11 Modem made a data connection at 4800bps.
*
CONNECT 9600 12 Modem made a data connection at 9600bps.
*
CONNECT 7200 13 Modem made a data connection at 7200bps.
*
CONNECT
12000
14 Modem made a data connection at
12000bps. *
CONNECT
14400
15 Modem made a data connection at
14400bps. *
CONNECT
19200
16 Modem made a data connection at
19200bps. *
CONNECT
38400
17 Modem made a data connection at
38400bps. *
CONNECT
57600
18 Modem made a data connection at
57600bps. *