User's Manual
18
The modem attempts to connect using MNP 2-4 error control procedures. If
this fails, the modem will connect in Normal modem
\ N4 V.42 with ODP & ADP phase detection.
\ N5* V.42 with ODP & ADP phase detection, MNP, or buffer (default).
The modem attempts to connect in V.42 error control mode. If this fails, the
modem attempts to connect in MNP mode. If this fails, the modem connects in
buffer mode and continues operation. This is also known as V.42/ MNP auto
reliable mode.
\N6 V.42 or disconnect. The modem attempts to connect in V.42 error control
mode. If this fails, the call will be disconnected.
\ N7 V.42, MNP, or buffer (default).
Result Codes:
OK n = 0, 1, 2, 3, 4, 5, 6
ERROR Otherwise
\ Vn Protocol Result Code
\V0* Disable protocol result code appended to DCE speed.
\ V1 Enable protocol result code appended to DCE speed.
Result Codes:
OK n = 0, 1
ERROR Otherwise
%Cn Data Compression Control
This command determines the operation of V.42bis and MNP class 5 data
compression. Online changes do not take effect until a disconnection occurs first.
%C0 V.42bis/ MNP 5 disabled. No data compression.
%C1 V.42bis/ MNP 5 enabled. Data compression enabled (default).
Result Codes:
OK n = 0, 1
ERROR Otherwise