User's Manual

*NC13 Spain

*NC14 Sweden

*NC15 Switzerland

*NC16 UK

*NC19 Czech Republic

*NC24 Poland

*NC25 Russia

*NC22 United States

*Tn Trellis Coding Selection

*T0 Disables Trellis coding

*T1* Enables Trellis coding

*On Transmission Level Selection

*O0* Selects output level -11dBm

*O1 Selects output level -12dBm

*O2 Selects output level -13dBm

*O3 Selects output level -14dBm

*O4 Selects output level -15dBm

*O5 Selects output level -16dBm

*O6 Selects output level -17dBm

*O7 Selects output level -18dBm

*O8 Selects output level -19dBm

*O9 Selects output level -20dBm

*O10 Selects output level -21dBm

*O11 Selects output level -22dBm

*O12 Selects output level -23dBm

*O13 Selects output level -24dBm

*O14 Selects output level -25dBm

*O15 Selects output level -26dBm

\ Nn Error Control Mode Selection

This command determines the type of error control used by the modem when sending

or receiving data.

\ N0 Normal mode.

\ N1 Direct mode.

\ N2 MNP or disconnect mode. The modem attempts to connect using MN

2-4 error control procedures. If this fails, the modem disconnects.

This is also known as MNP reliable mode.

\ N3 MNP, or buffer.