HELMET CAMCORDER ENGLISH USER GUIDE For gen 5 series Entertainment way ARCHOS 605: sold separately - VERSION 1.
L U A N A M Table of Contents Box Contents.......................................................................................................................................................3 Connections.........................................................................................................................................................3 Helmet CamCorder Description...................................................................................................................
Box Contents L S EG A A F L E & T Y M A N U A L Please note: actual box contents may vary and are subject to change without prior notice. Helmet Cam Headband Protective Pouch DVR Travel Adapter This User Guide Legal & Safety Notices Connections You can make these connections before switching on the device or while it is running. Carefully connect/disconnect the adapter to/from your ARCHOS device.
Helmet CamCorder description a b c d e f Recording status (red light) Connection status (green light) Microphone Status/Information button Start/Stop recording button Connector plug a c ARCHOS device (not included) b d e f DVR Travel Adapter Camera Controller
Making Recordings Recording with your ARCHOS Helmet Cam • Your ARCHOS Helmet CamCorder will be powered through your ARCHOS device, so be sure to charge it fully when intending to make longer recordings. • You can clip the controller of your ARCHOS Helmet CamCorder for example onto your shirt pocket. The camera itself is typically fitted into the headband and worn so that you record what you see.
Making a Recording Using the Video recorder Application of your ARCHOS Device Please refer to the section on making a video recording in the user manual of your ARCHOS device. • Open the Video recorder application. • Your ARCHOS device now powers the camera. On the screen, you see the image the camera is currently seeing. This preview screen thus permits you to adjust the position or direction of the camera before you start your recording.
Checking the Status of the ARCHOS Helmet Cam In order to find out whether the Helmet CamCorder is idle or recording, press the Status Button. The lights will indicate the status of the ARCHOS device as shown below: • Red and green: the ARCHOS device is presently making a recording. • Green: the Helmet CamCorder is connected correctly to the ARCHOS device and a recording can be started. • No light: the Helmet CamCorder is not connected properly to the ARCHOS device or the device is off.
! Precautions ▲ Please note the following points in order to avoid damage to your ARCHOS Helmet Cam: • Do not attempt to take the camera apart. There are no customer-serviceable parts inside, and you could receive an electric shock. • Handle the camera with care. A violent shock, for example through a fall, could damage it. • Use the camera in moderate conditions. Avoid cold or hot temperatures, humidity over 85%, and dust or sand. • The same precautions apply to the controller.
www Register Your Product! www.archos.com/register Once you unpack your ARCHOS product, we ask that you take a few minutes to register it. This will ensure that you have access to our help line and that we will be able to answer your inquiries, either by telephone or e-mail in the quickest and timeliest manner. This will also allow us to keep you informed about software updates or special late-breaking information about your device.
Technical Specifications Technical Specifications: ARCHOS Helmet Cam Resolution................................................................................. 420 TV Lines CCD.............................................................................................. 1/4-inch SONY Super HAD color CCD Lens.............................................................................................. Fixed Pinhole 3.6mm Field Of View..........................................................................
