User manual

USER MANUAL
17
SLAVE MODE
 Press FUNC to enter MODE selection
 Till to LED panel shows SLA
 Press ENTER to confirm setting
The laser is working in SLAVE MODE. Connect MASTER laser with several
SLAVE laser with DMX cable, SLAVE lasers are doing exactly the same laser
show as MASTER laser. Please check chapter for DMX cable connection for
referece.
REM MODE (Remote Optional)
 Press FUNC to enter MODE selection
 Till to LED panel shows REM
 Press ENTER to confirm setting
Please check Remote Instruction for remote control details.
 Attention In any standalone mode (excepted REM and SLA), press
ON/OFF for 2 second to activate remote function.
PATTERN MIRROR REVERSE SETTING
 Press FUNC to enter MODE selection
 Till to below LED display is
shown in LED panel and the
laser will show pattern right
side.
 Press ENTER to confirm the
setting.
 With help of UP button, the laser scanned world in x direction could be
reversed, as the graphic as below.