Installation Guide

CONTACT YOUR LOCAL POST OFFICE BEFORE INSTALLING THE MAILBOX TO ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT THE
STREET. GENERALLY, MAILBOXES ARE INSTALLED AT A HEIGHT OF 41-45 INCHES FROM THE ROAD SURFACE TO INSIDE FLOOR OF THE
MAILBOX OR POINT OF MAIL ENTRY (LOCKED DESIGNS) AND ARE SET BACK 6-8 INCHES FROM THE FRONT FACE OF CURB OR ROAD
EDGE TO THE MAILBOX DOOR.
1a
Lay post pieces on a flat surface, making sure
to align the screw holes.
Carefully slide the plastic bracket over the top
post and let it rest on the heads of the sheet
metal screws.
2
Tools (not included)
Join the two post pieces together using the 3
sheet metal screws.
!
DO NOT overtighten. Tighten only until snug.
x3
Attach the mounting plate to the post using
the 4 small hex bolts, nuts and 8 small
washers.
3
1b
© 2020, Architectural Mailboxes, LLCRev. I
Insert the bolt and one washer
through inside of the post and
secure with another washer and
nut from the outside.
3” Round Post with Cover & Mailbox
Model 950080
ASSEMBLY INSTRUCTIONS
R
Hardware (included)
x 3, large sheet metal screws
To join the two post pieces:
x 8, small washers
x 4, small nuts
x 4, small hex bolts
To attach the mounting plate
to the post:
x 8, large washers
x 4, large nuts
x 4, large hex bolts
To attach the mailbox to the plate:
x 4, small Phillips screws
To join the two decorative covers:
One Phillips Screwdriver
Two Wrenches
- or -