Installation & Assembly

1
Assemble the COOP HOUSE.
You will need these pieces:
Assemble the PLANTER BOX
.
You will need these pieces:
× 8
× 8
PLEASE READ:
Align the right side
coop house panel
FLUSH ALONG THE
TOP EDGE with the
front & back panels.
Attach the back panel to
the right panel with [P2]
screws, using the pre-drilled
holes as guides.
Attach the remaining panels,
also with [P2] screws.
NOTE: Make sure
top edges are flush.
NOTE: Make sure
top edges are flush.
NOTE: The right side panel D
can be identified by the rail
extension along the bottom.
Attach the back panel to the
right panel with [P2] screws,
using the pre-drilled holes as
guides. Attach the remaining
panels, also with [P2] screws.
Set the floor in place.
Made in China
Chicken Coop with Herb Planter2–3 Hens