Assembly Intructions

Table Of Contents

NOTE:

*Read all instructions before starting

*Do not completely tighten any bolts until the unit is fully

assembled and sitting on a level surface.

MADE IN CHINA

TOOL REQUIRED

Electrical Screwdriver

Phillip Screwdriver

Bolt and nut (8 pcs)

Long Screw (10 pcs)

J. Short

Screw (8 pcs)

Front Panel

Rear Panel

Side Panels (2)

D. Floor Panel

E. Sun Deck Panel

G. Stair Case

Deck Fence

Page 1 v.2

Please check contents before assembly.

Room with A View

PAGE 1
Room with A View Please check contents before assembly. H. Bolt and nut (8 pcs) A. Front Panel B. Rear Panel I. Long Screw (10 pcs) J. Short Screw (8 pcs) C. Side Panels (2) D. Floor Panel TOOL REQUIRED E. Sun Deck Panel G. F. Deck Fence Electrical Screwdriver or Phillip Screwdriver Stair Case NOTE: *Read all instructions before starting *Do not completely tighten any bolts until the unit is fully assembled and sitting on a level surface. MADE IN CHINA Page 1 v.
PAGE 2
1 2 Ix4 MPS002-SW S Hx8 Install Front (A), Rear (B) and Side (C) Panels with 8 Bolts and Nuts (H). 3 Place Floor Panel (D) inside the House. Place Sun Deck Panel (E) on House and Secure with 4 Long Screws (I). 4 Ix6 Jx5 Assemble Deck Fence (F) with 6 Long Screws (I). Fasten the Deck Fence (F) to the Sun Deck Panel (E) with 5 Short Screws (J). 5 6 Jx2 Jx1 Fasten the Staircase(F) to the Sun Deck Panel (E) with 2 Short Screws (J).