Installation & Assembly

To add the COMPONENTS,

you will need these pieces:

Unscrew the end-caps from the perch ends.

Place the perch inside the carrier and poke the

notched screw-post through to the carrier exterior,

catching a horizontal wire.

Screw the end-cap onto the screw-post from

the exterior (fig.3.1). Tighten to a stable, snug fit.

Follow the same procedure for the opposite end.

Open the cup door,

and insert the cup into

the cup holder, and

insert the posts of the

cup holder into the

sleeves on the inside

of the door (fig.3.2).

fig.3.2

fig.3.1

Rotate the windbell lock out

of the way and slide the grille

into the top track and the

tray into the bottom track.

For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals, visit our websites.