WOOD BEDSIDE RAMP Let’s make home sweet home even sweeter.
What you have x 20 x 20 x4
1 First, attach the legs to the top platform using four screws and washers. Next, attach the legs to the middle platform using four screws and washers. Wait until all the screws are in place before you tighten them.
2 Attach the leg brace with four screws, washers and cap nuts. Insert the screws through the legs and then through the leg brace.
3 Attach the straight support braces to the middle and bottom platforms with eight screws and washers. Before using the ramp, make sure all the screws are fully tightened. Turn the ramp upright and place it next to the bed or other surface you want your pet to reach.
4 You’re almost there! Offer treats to gently encourage your pet to practice walking up and down the ramp.
