Assembly Instructions

Your suggestions and satisfaction are important to us. If you are
satisfied with our product, could you share a positive review? If
there are any defects or any problems concerning our products
Please be reminded:
• Product not intended for the use of children
• Be aware some components may be swallowed. If such event occur, stop the use
of the product immediately and check or return and warranty policies.
2A
Place the Middle trunk
(B3) on top of perch
(C1). Make sure the
small wooden circle fits
inside the trunk.
STEP
2
2C
Screw half
way of the
connector
(A5) into the
remaining part
of Large Rod
(A1).
Screw Medium
Rod (A2) into the
remaining half of
the connector
(A5) until tight.
NOTE: Hold
connector while
rotating Rod.
2B

3
STEP
Place Medium Perch (C2)
over middle trunk (B2).
Rotate Perch (C2) until
tight.
3A
Screw half way of
the connector into
the remaining
part of Medium
Rod (A2).
3B
3C
Screw Small Rod (A3) into
the remaining half of the
connector (A5) until tight.
NOTE: Hold connector while
rotating rod.

4
STEP
Place the Top
trunk (B3) on top
of Medium Perch
(C2). Make sure
the small wooden
circle fits inside
the trunk.
Place Small Perch (C3)
over Top Trunk (B3).
Rotate Small Perch (C3)
until tight.
4A
4B
4C
Rearrange
branches so tree
looks full and
stylish. Once the
tree is secured, it
will experience a
natural sway
providing
movement and
fun for your
kitties.
please feel free to contact us. We will arrange the necessary
solutions for your complete satisfaction.
Thanks for choosing