Assembly Instructions

Cat Tree Square

ASSEMBLY INSTRUCTIONS

PARTS

Middle & Top Trunk (x2)

Perch Small

(x1)

Large Rod (x1)

Base (x1)

Connector (x2)

Base Trunk (x1)

Perch Medium

(x1)

Perch Large

(x1)

Medium Rod (x1)

Small Rod (x1)

Leveling Glide (x4)





STEP

Adjust base (B1)

using the four

Leveling

Glides

underneath to

ensure base is

stable and level.

Screw Large

Rod (A1) into

Base (B1) until

tight.

Place large perch (C1) over

base trunk (B2).

Rotate Perch (C1) until tight.



Place Base

Trunk (B2) in

the small

wooden circle

on Base (B1).

PAGE 1
Cat Tree Square ASSEMBLY INSTRUCTIONS PARTS 1A Small Rod (x1) Medium Rod (x1) Large Rod (x1) STEP Leveling Glide (x4) 1 1B Adjust base (B1) using the four Leveling Glides underneath to ensure base is stable and level. Screw Large Rod (A1) into Base (B1) until tight. Connector (x2) 1C Place Base Trunk (B2) in the small wooden circle on Base (B1).
PAGE 2
STEP 2 STEP 2B Screw Medium Rod (A2) into the remaining half of the connector (A5) until tight. NOTE: Hold connector while rotating Rod. 2A Screw half way of the connector (A5) into the remaining part of Large Rod (A1). 2C Place the Middle trunk (B3) on top of perch (C1). Make sure the small wooden circle fits inside the trunk. STEP 4A 3 3A Place Medium Perch (C2) over middle trunk (B2). Rotate Perch (C2) until tight.