Assembly Instructions

Cat Tree Medium

STEP

Adjust base (B1)

using the four

Leveling

Glides

underneath to

ensure base is

stable and level.

Screw Large

Rod (A1) into

base (B1) until

tight.

Place Medium perch (C2) over

base trunk (B2).

Rotate Perch (C2) until tight.



Place Base

Trunk (B2) in

the small

wooden circle

on Base (B1).

ASSEMBLY INSTRUCTIONS

PARTS

Middle & Top Trunk (x2)

Small Perch

(x1)

Large Rod (x1)

Base (x1)

Connector (x2)

Base Trunk (x1)

Medium Perch

(x1)

Small Rod (x1)

Leveling Glide (x4)





PAGE 1
Cat Tree Medium ASSEMBLY INSTRUCTIONS PARTS 1A Leveling Glide (x4) Small Rod (x1) Large Rod (x1) STEP 1 1B Adjust base (B1) using the four Leveling Glides underneath to ensure base is stable and level. Screw Large Rod (A1) into base (B1) until tight. Connector (x2) 1C Place Base Trunk (B2) in the small wooden circle on Base (B1). Base (x1) Base Trunk (x1) Medium Perch (x1) Middle & Top Trunk (x2) Small Perch (x1) 1D Place Medium perch (C2) over base trunk (B2).
PAGE 2
STEP 2 STEP 3 2B 2A Screw half way of the connector (A5) into the remaining part of Large Rod (A1). 3A Screw Small Rod (A3) into the remaining half of the connector (A5) until tight. NOTE: Hold connector while rotating Rod. Place Small Perch (C3) over Top trunk (B3). Rotate Small Perch (C3) until tight. Make sure the small wooden circle fits inside the trunk. 3B Rearrange branches so tree looks full and stylish.