Installation & Assembly

step 4 PARTS USED:
step 5 PARTS USED:
step 6 PARTS USED:
Assemble and insert two
food/water cups as illustrated.
Insert the two short
perches as illustrated.
Insert the long perch
as illustrated.
Catch the inner wire of the low roof
on the loops along the top edge
of the right-side panel. Flex the
mesh to catch the roof on the third
inner wire along the vertical sides.
Finish assembly with the peak roof.
Start at one end and catch the inner
wire of the roof on the loops along the
top edge of the side panel. Flex the
mesh to catch the roof on the loops
along the peak of the front and back
panels. Finish with the loops on the
opposite end side panel.
*
CLEANING RECOMMENDATIONS
→
Use a soft cloth or Teflon-resistant
non-abrasive scrubber.
→
Wash with warm water and a mild,
pet-friendly soap. Rinse thoroughly.
→
Hand dry all parts with a soft
dry cotton cloth before reassembling.
→
Do not leave plastic parts to dry in
the sun as they may warp.
Made in China