Installation & Assembly

read first REVIEW BEFORE ASSEMBLY

step 1 PARTS USED:

step 2 PARTS USED:

step 3

Place the completed cage

mesh unit into the base.

Starting at one end, align

the loops on the mesh with

openings in the base.

Guide the mesh in place

between the edge and the

tabs along the inner rim

of the base.

Finish with putting the loops

into the base openings on the

opposite end.

Removable tray will

already be in the base.

Place grille into base

before adding mesh.

Create the cage body by

beginning at the bottom

corner and hooking the

panels together (arrow #1).

Weave the alternating

hooks together up the

seam (arrows #2–3) by

flexing the mesh panels.

Follow the same method

for the other seam (arrows

#4–8).

The end result will

look like this.

• TOOLS: No tools are required. For assistance or replacement

parts, please contact us

House Style

Tiel Cage

Made in China

PAGE 1
House Style Tiel Cage step 1 PARTS USED: step 2 PARTS USED: read first REVIEW BEFORE ASSEMBLY • TOOLS: No tools are required. Removable tray will already be in the base. For assistance or replacement parts, please contact us Place grille into base before adding mesh. Create the cage body by beginning at the bottom corner and hooking the panels together (arrow #1). Weave the alternating hooks together up the seam (arrows #2–3) by flexing the mesh panels.
PAGE 2
step 4 PARTS USED: Insert the two short perches as illustrated. Assemble and insert two food/water cups as illustrated. step 5 PARTS USED: step 6 PARTS USED: * Catch the inner wire of the low roof on the loops along the top edge of the right-side panel. Flex the mesh to catch the roof on the third inner wire along the vertical sides. CLEANING RECOMMENDATIONS → Use a soft cloth or Teflon-resistant non-abrasive scrubber. → Wash with warm water and a mild, pet-friendly soap. Rinse thoroughly.