Assembly Instructions

cage assembly instructions
exterior: 18"L × 18"W × 49¼"H
w/seed guards: 26¼"L × 26¼"W
interior: 17"L × 17"W × 33½"H
wire: [gauge] 12 & 14 [spacing] ½"
exterior: 24"L × 20"W × 53⅝"H
w/seed guards: 32½"L × 28⅛"W
interior: 23⅛"L × 19"W × 37⅝"H
wire: [gauge] 12 & 14 [spacing] ½"
getting started!
READ THESE NOTES FIRST:
• Enlist A Friend: These cages are easy for one person to
assemble, but for best results, you may want to enlist a friend
to help.
1 Assemble the cage base:
The lower side (L1) & (R1) panels
feature:
→
channels for the grille and tray —
make sure the channels face the
interior of the cage
→
tabs at the bottom which correspond
to sleeves on the legs of the front
and back panels (see fig.1)
Slide the tabs on the left side lower
(L1) panel down into the sleeves on
the legs of the front (F) and back (B)
panels.
Install one long hex screw — through
the front and back panels — into the
top corners of (L1). Losely tighten the
screws into place.
Repeat installation steps for the right
side lower (R1) panel.
Snuggly tighten screws in all four corners
to create a secure base.
steps
LEFT SIDE
FRONT
BACK
RIGHT SIDE
GRILLETRAYSEED GUARDS
L2
L1
R2
R1
G
T
F
C
B
{8} hex head screws
{ 8 } short hex head
screw & nut pairs for
seed guard
{ 1 } allen wrench
{ 4 } rolling casters
{ 2 } cup hangers & cups
{ 1 } wood dowel perch
SG3
SG2
SG1
SG4
2 With the lower side panels installed, carefully
lay the cage on its side as illustrated.
Install rolling casters in each leg post.
After the casters have been installed, carefully
upright the cage and continue assembly.
L1
B
L1
R1
F
KEY:
L = Left panels
B = Back panel
C = Center (Top) panel
R = Right panels
F = Front panel
parts
(fig.1)
• Tools: You will only need an allen wrench (provided).
If you use your own tools, please note:
We
DO NOT
recommend power tools. Screws can be over-tightened and
parts may be damaged or stripped.
We are not responsible
for this type of damage.
Assembly steps and parts lists are exactly the same for both
cages. The only differences are in dimensions.
Review instructions thoroughly before assembling
the cage.
If you require assistance, please contact Customer
Service
or
through links online
• Count Hardware & Review All Parts: If any screws are
missing, or if parts have been damaged during shipping and
handling, please contact Customer Service immediately.