Assembly

5
To complete the cage
assembly, you will need
these pieces:
6
To add the PLATFORMS,
you will need these pieces:
× 4
× 8
× 8
× 2
× 2
CLICK
To solidify the entire cage, press a connector
onto each panel intersection until it clicks
and all surfaces are flush.
“
T” clips connect the intersections
along the front and back top edge.
N
OTE: “T” clips do not connect
with the roof panel.
“+” clips connect the intersection
of panels on the front and back.
Base clips connect the cage to the
base. Hook the “claw” end of the
clip onto the short horizontal wire.
Press your thumb into the dimple
of the clip and press down until it
clicks into the slot on the cage base.
Hammocks and
platforms may be
placed at different
levels, but for
best results, add
them to the interior
at the positions
illustrated here.
For solid platforms,
make sure they
clip fully into place
on the cage wires for
maximum stability.
★
Your cage is now fully
assembled and ready for use.
Made in China