Installation & Assembly

To use: Open the pull down door on the front panel, place litter pan inside against the back
wall of the Litter Loo™. Pull down the front door when litter pan needs to be cleaned or the
litter replaced.
Complete.
Step 5: Place the Table Top piece in place
and secure it by (4) Short Thumb Screws
on each corner .
'
Step 4: Attach the Back Panel with the
Side Wall Panels with (4) Long Thumb
Screw, (2) on each side.
Step 2: Attach the second Side Wall Panel
to the Front Panel with (2) Long Thumb
Screw .
Step 3: Install the Floor Panel .
Step 1: Connect the Front Panel with a
Side Wall Panel with (2) Long Thumb
Screws.