Specifications

Optima 70 - 2 35
NOTE: Ensure that the fireplace is turned off and cool.
After opening the Bay Door package, inspect the bay door to ensure that no damage has oc-
curred inside the package. Please report any damage immediately to your authorized Archgard
Dealer.
1. If Louvers are on, remove the upper grilles (louver) by pulling the assembly forward.
2. If Louvers are on, Remove the lower grilles (louver) by removing the four hex head
mounting screws.
3. Install the knob extensions on the valve.
4. Move the bay assembly over the front of the appliance, center it in front of the flat door
and hang over existing door.
5. Wipe off any finger prints before turning on the appliance, so as not to etch the prints on
to the bay louvers.
OPTIONAL BAY DOOR INSTALLATION
WARNING:
THE OPTIONAL BAY DOOR IS A DECORATIVE OPTION ONLY AND IS MANUFACTURED
WITH TEMPERED GLASS. THIS UNIT MUST NOT BE OPERATED WITHOUT THE FLAT
CERAMIC GLASS DOOR SECURED IN PLACE, BEHIND IT.
Retaining hooks
(behind)
Lower grills
(louver) on Bay
Window
CAUTION:
Only Trim kit (s) supplied by the manufacture shall be used in the installation of this appliance.