Specifications

DV - 520
19
OPERATION INSTRUCTIONS
FOR YOUR SAFETY, READ BEFORE LIGHTING
INITIAL OPERATION
• Check that the appliance is properly vented and connected to the gas supply.
• Check that the logs and branches are properly placed.
• Check that all external parts, such as grills, door and faceplate are properly attached and
fastened.
• Check that the unit is clean and especially that there are no fingerprints left on any
exterior fireplace surfaces, as high temperatures can bake these prints on permanently.
NOTE : When operated for the first few times, the appliance will emit some odor and fumes.
This is due to the heat from the appliance evaporating the oils and solvents used in
fabricating the appliance. Close off the room to the rest of the house and open all
windows. Keep the room well ventilated as smoke alarm may sound. Run the
appliance continuously for at least 4 hours to allow paint to cure.
WARNING : If you do not follow these instructions exactly, a fire or explosion
may result, causing property damage, personal injury or loss of
life. Do not operate the appliance with the glass front removed,
cracked or broken. Replacement of the glass should be done by a
licensed or qualified service person
.