Specifications

57-DVRS50 36
Regularly:
 Frequent cleaning of the ceramic glass is required. Archgard recommends using a good
quality “gas fireplace” glass cleaner that is available at any hearth retail location. DO NOT
CLEAN WHILE HOT.
 Clean and remove any lint accumulations or debris from the grills and in any combustion
and convection air passage ways.
 Keep the appliance area free from combustible materials, such as paper, wood, clothing,
gasoline and flammable solids, liquids and vapors.
 Visually check the height and color of the burner and pilot flames.
Every 2 to 3 months:
 Remove the glass door and clean the inside of the glass with a good quality “gas
fireplace” glass cleaner. DO NOT CLEAN WHILE HOT.
Once a year, have a qualified service technician:
 Completely inspect the appliance and the venting system, if the vent pipe or seal is found
to be defective, replace and or reseal
 Clean and remove any lint accumulations or debris in the firebox, on the burners, on the
pilot, at the primary air opening, and in any combustion and convection air passageways.
 Check the safety system of the gas valve and the appliance.
MAINTENANCE
CAUTION:
Do not conduct maintenance on the appliance while it is operating or while it is still hot.
The exterior painted surfaces, glass and plated trims may be cleaned with a soft, non-abrasive
cloth and water or a suitable, mild, non-abrasive cleaner.
WARNING: All parts removed or disturbed, including guards and grills, must be
properly replaced after maintenance. Service and repair must be
conducted by a qualified service person. If these instructions are not
followed, a fire or explosion may result, causing property damage,
personal injury or loss of life.
CLEANING THE APPLIANCE