Specifications

57-DVRS50 19
1. Hang the left and right side back panel onto the bracket in the
back of the firebox. Align with the far outside edge of the
bracket.
2. Hang the center back panel onto the bracket and slide the two
outside panels in until they touch the center panel.
Rear Panel Installation Instructions
Side Panel & Baffle Installation Instructions
Set the right and left side
panels by inserting the tabs
into the slot of the support
plate. Panel s should angle
into the firebox (as shown)
Set the baffle on top of the side
panel so the slot in the baffle
sets over the tab on the side
panel.
Small holes to the back
The side panels are secured
thru the side of the firebox