Specifications

31-DVI33N 18
SURROUND INSTALLATION
Surround options available are dependent upon the control panel configuration. (See Control
Panel Locations regarding configuration.) Shallow surround options are not available on a unit
with ‘Controls Out’ configuration.
Make sure the gas and electrical lines are properly connected to the appliance. Slide the unit
into the fireplace and slide the excess flue liner material back onto the chimney. Before the ap-
pliance is fully recessed into the fireplace, attach the surround onto the appliance.
Attach the surround to the appliance at the locations shown by lining up the tabs on the sur-
round with the slots on the unit. Make sure the surround drops down and fully engages. Then
finish with the wiring connection to the on/off switch on the side of the trim. Now fully “seat” the
unit into its final position.
Surround Mounting slots
Surround Mounting tabs