Specifications

27-DVIM22 23
LOG PLACEMENT... Continued
L O G # 4
Locate Log #4 and align the two holes in the log with the two locater pins in the center of the burner.
Push down onto locator pins as shown.
L O G # 5
Locate Log #5 and align the hole in the bottom with the locater pin in the burner. Place the other end
of the log in the locator pin of log #2.
L O G # 6
Locate Log 6 and align the hole in the bottom with the locater pin in the burner. Lay the log back top
rest against log #2 and log #4
LOG #4
LOG #5
LOG #6
Fig. 23-A
Fig. 23-B
Fig. 23-C