User's Manual

Page : 11
CONFIDENTIAL Arcadyan Corporation Ver.0.1
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is
responsible for the compliance to all the rules that apply to the product
into which this certified RF module is integrated.
Additional testing and certification may be necessary when multiple modules are used.
Any changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least
20cm separation with the antenna while this end product is installed and operated. The
end user has to be informed that the IC radio-frequency exposure guidelines for an
uncontrolled environment can be satisfied.
The end user has to also be informed that any changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains IC:
4711A-WN9711 ".
The Host Model Number (HMN) must be indicated at any location on the exterior of the
end product or product packaging or product literature which shall be available with the
end product or online.
Ant. Brand
Model Name
Antenna Type Connector
Gain (dBi)
2.4GHz 5GHz
1 ACON AEMEE-10000
Dipole Antenna
Reversed-SMA 3.24 4.54
2 ACON AEMEE-10000
Dipole Antenna
Reversed-SMA 3.24 4.54
Cable Brand Model Name
Cable
Length
(mm)
Cable Loss (dB) True Gain (dBi)
2.4GHz / BT 5GHz 2.4GHz / BT 5GHz