Product Specification Product Specification RUNTKA810WJQZ 802.11n wireless LAN module v.
Product Specification Table of Contents Chapter 1 Introduction .......................................................................................................... 4 1. Introduction ................................................................................................................. 4 1.1 Product Features ........................................................................................................ 4 1.2 Applications ..............................................................
Product Specification Revision History Edition # V 01 Reason for revision ♦ Initial Document Issue date th August 10 2010 Written by Troy Chen z WN8522D 3 3
Product Specification Chapter 1 Introduction 1. Introduction WN8522D is a dual band wireless 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 300 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11a/b and IEEE 802.11g ,and draft IEEE 802.11n standards. WN8522B will enable a next generation of high-data-rate platforms for operation in the 2.
Product Specification Chapter 2 Hardware 2.1 General Overview ♦ ♦ USB 2.0 Interface and 802.11 n chipset-on-board design. Antenna: 2 external Antennas on board 2.2 Hardware Architecture Broadcom 43236 single chip USB2.0 2.3 ♦ Main Chipset Information BCM43236 is a dual band IEEE 802.11n-compliant MAC/PHY/Radio complete system on a chip with 2.4Ghz and 5GHz internal PA 2.4 PCB dimension PCB dimension : 78.
Product Specification 2.
Product Specification Chapter 3 Software 3.1 Operating System Supported ♦ Windows 2000, XP, Vista ♦ Linux Driver 3.2 Wireless Mode Supported ♦ AP (Infrastructure) Client mode 3.3 Security ♦ AP (Infrastructure) mode supports ♦ Static WEP that support both 64 and 128 bit keys. ♦ WPA(TKIP) with PSK ♦ Ad-hoc mode supports ♦ None (plaintext) ♦ Static WEP that supports both 64 and 128 bit keys.
Product Specification Chapter 4 WN8522D 3 Appearance 8
Product Specification Chapter 5 ♦ Specifications Frequency Band: Draft 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA – FCC Canada – IC Europe – ETSI Japan – STD-T66/STD-33 2412~2462MHz (Ch1~Ch11) 2412~2462MHz (Ch1~Ch11) 2412~2472MHz (Ch1~Ch13) 2412~2484MHz (Ch1~Ch14) 802.11a Radio : 5 GHz 5.150~5.250GHz 5.250~5.350 GHz 5.470~5.725 GHz 5.725~5.850GHz ♦ Operating Channels: IEEE 802.
Product Specification TX: TBDat 11dBm HT40 CH38 2x2 RX: TBD at 11dBm HT40 CH38 2x2 Power Saving: TBD Radio OFF mode: TBD ♦ Modulation DBPSK @1Mbps DQPSK@2Mbp CCK@5.
Product Specification References ♦ ♦ ♦ ♦ BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
Product Specification FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE: This module is intended for OEM integrator.
Product Specification LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: RAXWN8522D3JU ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules.
Product Specification IC Statement This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. For product available in the USA/Canada market, only channel 1~11 can be operated.
Product Specification IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module.
