User's Manual

ManualsBrandsArcadyan Technology ManualsElectronicsIEEE Dual Band 802.11n USB2.0 Module

Product Specification

WN8522D 10

Product Specification

WN8522D 10-CP

IEEE Dual Band 802.11n USB2.0 Module

v.02

Arcadyan P/N：

FICCP8522014J-P (Connect-DIP)

Compal P/N：

PK29820010I

Summary of content (22 pages)

PAGE 1
Product Specification Product Specification WN8522D 10-CP IEEE Dual Band 802.11n USB2.0 Module v.
PAGE 2
Product Specification Table of Contents Chapter 1 Introduction ............................................................................ 5 1. Introduction ................................................................................................................. 5 1.1 Product Features........................................................................................................ 5 1.2 Applications ..........................................................................................
PAGE 3
Product Specification Chapter 5 Specifications ....................................................................... 15 Chapter 5 Specifications ....................................................................... 16 References ...................................................................................................................
PAGE 4
Product Specification Revision History Edition # Reason for revision Issue date Written by V 01  Initial Document August 29th 2011 Troy Chen V 02  Revised version December 16th, 2011 Stephanie Tsai WN8522D 10 4
PAGE 5
Product Specification Chapter 1 Introduction 1. Introduction WN8522D is a dual band wireless 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 300 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11a/b and IEEE 802.11g ,and draft IEEE 802.11n standards. WN8522B will enable a next generation of high-data-rate platforms for operation in the 2.
PAGE 6
Product Specification Chapter 2 2.1 Hardware General Overview  USB 2.0 Interface and 802.11 n chipset-on-board design.  Antenna: Antennas on board 2.2 Hardware Architecture Broadcom 43236 single chip USB2.0 2.3 Main Chipset Information  BCM43236 is a dual band IEEE 802.11n-compliant MAC/PHY/Radio complete system on a chip with 2.4Ghz and 5GHz internal PA 2.4 PCB dimension PCB dimension : 60x30 mm Weight (Connect-DIP)：6.
PAGE 7
Product Specification 2.
PAGE 8
Product Specification 2.
PAGE 9
Product Specification 2.
PAGE 10
Product Specification 2.8 BOM List Part no Descrip 165000073400J RNA R0A SCHEMATIC FILE WN8522D 10-CP (D) CICCP8522014J ??CONFIG WN8522D 10-CP (D) 123700011600J R01 PARTITION COVER WN8522B-LF-FX LT 175000377000J V0.10 FINAL TEST PROGRAM WN8522D 10-CP (D) NICCP8522014J ??PCBA WN8522D 10-CP (S) Con-DIP MAIN 175000377100J V0.
PAGE 11
Product Specification 20010000FN60J RES SMD 100 ohm +-1% 1/16W 0402 T0.35 HF 20010020A056J RES SMD 10Kohm 1% 1/20W 0201 T0.23 HF WALSIN 20010020A021J RES SMD 10Kohm 1% 1/20W 0201HF CYNTEC 20010020A019J RES SMD 10Kohm 1% 1/20W 0201 HF YAGEO 20010030JT70J RES SMD 100K OHM 5% 1/20W 0201 T0.25 HF 20015020A008J RES SMD 15Kohm 1% 1/20W 0201 T0.23 HF YAGEO 20022100A007J RES SMD 221ohm 1% 1/20W 0201 T0.3 HF WALSIN 20026730FN60E RES SMD 267K ohm +-1% 1/16W 0402 T0.35 HF 20040210FN61E RES SMD 4.
PAGE 12
Product Specification 2044751KC100A C SMD CER 4.7uF 10% 16V X5R 1206 LT/LF TAIYO 2044751KC110A C SMD CER 4.7uF 10% 16V X7R 1206 HF 2044754MJ000E C SMD CER 4.7uF 10% 6.3V X5R 0603 T0.8 LT/LF MURATA 2044754A0013J C SMD CER 4.7uF 10% 6.3V X5R 0603 T0.8 HF TAIYO 246106-002 ACCLABEL 18.2X7.1mm(SING) LT TICCP8522014J ??NON SMD ASM WN8522D 10-CP (S) Con-DIP MAIN 1182A0000103J ?!PIN HEADER 1X5P 1.
PAGE 13
Product Specification Chapter 3 Software 3.1 Operating System Supported  Windows 2000, XP, Vista  Linux Driver 3.2 Wireless Mode Supported  AP (Infrastructure) Client mode 3.3 Security  AP (Infrastructure) mode supports  Static WEP that support both 64 and 128 bit keys.
PAGE 14
Product Specification Chapter 4 Appearance 4.
PAGE 15
Product Specification 板廠二： WN8522D 10 15
PAGE 16
Product Specification Chapter 5 Specifications 5.1  Frequency Band: Draft 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA – FCC Canada – IC 2412~2462MHz (Ch1~Ch11) 2412~2462MHz (Ch1~Ch11) 802.11a Radio : 5 GHz 5.150~5.250GHz 5.725~5.850GHz  Operating Channels: IEEE 802.11b/g/n compliant: 11 channels (US, Canada)  Transmit Power and Sensitivity: TX Output Power: 2,4 GHz  11b: 15 +/- 2 dbm  11g: 13 +/- 2 dbm  11n HT20, 2.4GHz: 13 +/- 2 dbm  11n HT40, 2.
PAGE 17
Product Specification o Typical -86dBm@11Mbps, +/-2dBm  802.11g: o Typical -72dBm @ 54Mbps, +/-2dBm  Draft 802.11n 2.4GHz HT20: o MCS=7 -68dbm, +/-2dBm  Draft 802.11n 2.4GHz HT40: o MCS=7 -65dbm, +/-2dBm  Modulation DBPSK @1Mbps DQPSK@2Mbp CCK@5.
PAGE 18
Product Specification References     BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
PAGE 19
Product Specification Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 20
Product Specification This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module.
PAGE 21
Product Specification This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 22
Product Specification Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied.