Product Specification Product Specification WN8122A -65 IEEE Dual Band 802.
Product Specification Table of Contents Chapter 1 Introduction .......................................................................................................... 4 1. Introduction ................................................................................................................. 4 1.1 Product Features ........................................................................................................ 4 1.2 Applications ..............................................................
Product Specification Revision History Edition # V 01 V02 WN8122A-65 Reason for revision Issue date Initial Document March 21 2011 Revised Version Jun 22 2011 Written by Troy Chen Mike _Chern 3
Product Specification Chapter 1 Introduction 1. Introduction WN8122A 65 is a dual band wireless 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 300 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11a/b and IEEE 802.11g ,and draft IEEE 802.11n standards.
Product Specification Chapter 2 Hardware 2.1 General Overview USB Interface and 802.11 n chipset-on-board design. Antenna: 2 internal PCB Antennas on board 2.2 Hardware Architecture Broadcom 43236 single chip 2.3 Main Chipset Information BCM43236 is a dual band IEEE 802.11n-compliant MAC/PHY/Radio complete system on a chip with 2.4Ghz and 5GHz internal PA 2.
cification Prroduct Spec 2.
Product Specification Chapter 3 Software 3.1 Operating System Supported Linux Windows 3.2 Wireless Mode Supported AP (Infrastructure) Client mode 3.
Product Specification Chapter 4 Specifications Frequency Band: 802.11a: ISM Band 5.150 ~ 5.850Ghz (subject to local regulations) 802.11b: ISM Band 2.400 ~ 2.4835Ghz (subject to local regulations) 802.11g: ISM Band 2.400 ~ 2.4835Ghz (subject to local regulations) Draft 802.11n: ISM Band 2.4GHz HT20 2.400 ~ 2.4835Ghz (subject to local regulations) HT40 2.422 ~ 2.452Ghz (subject to local regulations) 5GHz Channel Frequency (GHz) Location 36 5.180 Indoor Only 40 5.200 Indoor Only 44 5.
Product Specification 149 153 157 161 165 5.745 5.765 5.785 5.805 5.825 North North North North North America America America America America Transmit Power and Sensitivity: TX Output Power: 11b: 16 +/- 1.5 dbm 11g: 15 +/- 1.5dbm 11n HT20, 2.4GHz: 13 +/- 1.5dbm 11n HT40, 2.4GHz: 10.5 +/- 1.5dbm 11a : 14.5 +/- 2dbm 11n HT20, 5GHz: 13 +/- 2dbm 11n HT20, 5GHz: 10.5 +/- 2dbm Rx Sensitivity:(Typical) 802.11a: o Typical -70dBm@54Mbps, +/-2dBm 802.
Product Specification Modulation DBPSK @1Mbps DQPSK@2Mbp CCK@5.
Product Specification References BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
Product Specification Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification 5650 MHz band. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module.
Product Specification IC Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada. Licence-Exempt Radio Apparatus This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Product Specification Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
