USER MANUAL USER MANUAL WN7911B IEEE 802.11n SDIO WiFi module V 01 .
USER MANUAL Table of Contents Chapter 1 Introduction ...................................................................................................... 4 1.1 Introduction ........................................................................................................ 4 1.2 Product Features................................................................................................. 4 1.3 Applications ............................................................................................
USER MANUAL Revision History Edition # V 0.
USER MANUAL Chapter 1 Introduction 1.1 Introduction WN7911Ban industrial wireless 802.11n SDIO WiFi module enable wireless networking systems to attain data transmission speeds up to 150megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11b and IEEE 802.11g ,and IEEE 802.11n standards. 1.2 Product Features Operate at ISM frequency bands (2.
USER MANUAL Chapter 2 2.1 Hardware General Specification Host Interface SDIO/GSPI Standard IEEE 802.11n, 802.11b/g Chipset RTL8189ESC9G34P1 Description Realtek RTL8189ESC9G34P1:MAC/ WiFi Baseband / RF: Modulation 802.11b: CCK, DQPSK, DBPSK 802.11g: 64 QAM, 16 QAM, QPSK, BPSK 802.11n: BPSK, QPSK, 16-QAM, 64-QAM Data Rate 8802.11b: 11, 5.5, 2, 1 Mbps; 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.
USER MANUAL 2412~2484MHz (Ch1~Ch14) Operating Channel WiFi 2.4GHz: 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14(ch1-14)– Japan 2.400GHz ~ 2.4835 GHz Security WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.
USER MANUAL 2.
USER MANUAL Chapter 3 Appearance 3.1 PCB dimension Module size: 25mm X 12.5mm X 2.1mm Length Width Height 25 12.5 2.1 (Tolerance:±0.1mm) (Tolerance:±0.1mm) (Tolerance:±0.15mm) Dimensions (mm) The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
USER MANUAL 3.
USER MANUAL WN7911B 10
USER MANUAL WN7911B 11
USER MANUAL FCC Statement: WN7911B 12
USER MANUAL Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
USER MANUAL This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
USER MANUAL USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied.
USER MANUAL (1) 「經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅 自變更頻率、加大功率或變更原設計之特性及功能」。 (2) 「低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象 時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法 規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用 電波輻射性電機設備之干擾」。 (3) 「不致造成違反低功率電波輻射性電機管理辦法之所有控制、調整及開關之使用 方法」。 (4) 「對任何可能造成違反管理辦法規定之調整予以警告，或建議由具有發射機維修 專長之技術人員執行或由其直接監督及負責」。 (5) 「對任何可能造成違反管理辦法之零件(晶體、半導體等)置換之警告」。 (6) 「本模組於取得認證後將依規定於模組本體標示審驗合格標籤, 並要求平台廠商 於平台上標示「本產品內含射頻模組 CC XX xx LP yyy Z z」。 WN7911B 16
