Product Specification Product Specification WN7111A-FI IEEE 802.11n USB2.0 Module v.
Product Specification Table of Contents Chapter 1 Introduction ______________________________________________ 1.1 Product Features ___________________________________________ 1.2 Applications _______________________________________________ Chapter 2 Hardware _______________________________________________ 2.1 General Overview ___________________________________________ 2.2 Hardware Architecture _______________________________________ 2.
Product Specification Revision History Edition # Reason for revision Issue date Written by V 0.1 Initial Document 2011/02/10 Troy Chen V 0.2 Update Tx power 2011/04/27 Peter Wang Add product appearance Add FCC statement.
Product Specification Chapter 1 Introduction WN7511F is a wireless 1x1 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 150 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11b and IEEE 802.11g ,and draft IEEE 802.11n standards.
Product Specification Chapter 2 2.1 Hardware General Overview USB 2.0 Interface and 802.11 n chipset-on-board design. 1 printed antenna 2.2 Hardware Architecture BRCM 43234 2.3 Main Chipset Information The BRCM43234 is a dual-band (2.4GHz and 5GHz) IEEE802.11n compliant MAC/PHY/Radio complete system-on-a-chip with 2.4GHz and 5GHz interal Pas. 2.4 PCB dimension 23x35mm 2.
Product Specification 6
Product Specification Chapter 3 3.1 Software Operating System Supported Windows 2000, XP, Vista Linux OS 3.2 Wireless Mode Supported AP (Infrastructure) Client mode 3.3 Security AP (Infrastructure) mode supports Static WEP that support both 64 and 128 bit keys. WPA,WPA-PSK, WPA2,WPA2-PSK Ad-hoc mode supports None (plaintext) Static WEP that supports both 64 and 128 bit keys.
Product Specification Chapter 4 Appearance Top side Bottom side 8
Product Specification Chapter 5 Specifications Frequency Band: 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA – FCC, 2412~2462MHz (Ch1~Ch11) Operating Channels: 11 channels (US, Canada) Transmit Power and Sensitivity: TX Output Power:(Typical) 16dBm +/- 1.5dBm (2.4GHz, 11Mbps, CCK) 15dBm +/- 1.5dBm (2.4GHz, 54Mbps, OFDM) 15dBm +/- 1.5dBm (2.4GHz, 11n HT20) 13dBm +/- 1.5dBm (2.
Product Specification QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mpb and above, RX up to 150Mbps Operating Temperature: 0 ~ 40 oC ambient Storage Temperature: -10 ~ 70 oC ambient Humidity: 5 ~ 90% and must be non-condensing Regulation and certification compliance available: - FCC 10
Product Specification FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification any other antenna or transmitter. IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
Product Specification References BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp.
