User Manual

37
Configuring the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / English / A31008-E505-B104-1-19 / configuration.fm / 26.02.2004
The list shows the following parameters for each connection partner:
Establishing a connection
ì Double-click in the list on the connection partner with which you want to set up a
connection.
This connects your PC to the connection partner.
SSID Shows the connection partner's ID (see "SSID (Service Set
Identifier)" on page 23).
BSSID Shows the connection partner's physical address (Basic Service Set
Identifier).
In networks with Infrastructure mode, the BSSID corresponds to
the MAC address of the Access Point.
Channel Shows the radio channel the connection partner uses to transmit
data (see "Channel" on page 25).
Encryption Shows whether radio traffic to the connection partner is encrypted
(see "Encryption" on page 29).
If this is the case, you will see a key icon.
Signal Shows the signal strength of the radio traffic between your PC and
the connection partner as a percentage (see "Status" on page 33).
Turbo Mode Shows whether the connection partner's Turbo mode has been
activated (see "Turbo Mode" on page 26).
Transmission Mode Shows the connection partner's current Transmission mode
(see "Transmission Mode" on page 25).
Network Mode Shows the connection partner's current Network mode
(see "Network Mode" on page 24).
i
If your network adapter's active configuration profile is not compatible
with the connection partner's settings, you will first see the
Configuration – General tab.
ì Change the settings required for the connection.
OR
ì Select a saved profile.
Then the connection will be set up automatically.