User Manual

34
Configuring the Gigaset USB Adapter 54
Gigaset USB Adapter 54 / English / A31008-E505-B104-1-19 / configuration.fm / 26.02.2004
IP addresses on the network
The IP Settings tab provides you will all the information relevant for using your PCs in
the network (LAN and WLAN). There are two buttons for updating and releasing your
PC's WLAN address. A graphic display in the lower section of the tab shows the process
of data traffic over the WLAN.
Encryption Shows the encryption method
(see "Encryption" on page 29)
Sent Packages Shows how many data packets have been sent on the current
WLAN since the connection was set up between your PC and
your connection partner.
Received Packages Shows how many data packets have been received from
connection partners on the current WLAN since the connection
was set up.
Signal Strength Shows the quality of the wireless connection.
The graphic display of the Signal strength is supported with a
percentage figure and an evaluation of the signal (excellent,
good, average or bad).