User's Manual

802.11g 54Mbps USB Adapter User Guide
Contents:
About the 802.11g
54Mbps USB Adapter
Network Configuration
and Planning
Adapter Installation and
Configuration for
Windows 98SE/2000/Me/
XP
Navigating the Wireless
Configuration Utility
Troubleshooting
Glossary
Product Specifications for
802.11g 54Mbps USB
Adapter
U.S. Robotics
Corporation Limited
Warranty
Regulatory Information
802.11g 54Mbps USB Adapter User Guide
Adapter Installation and Configuration for
Windows 98SE/2000/Me/XP
System Requirements
In order to install and use the 802.11g 54Mbps USB Adapter, your computer must
meet the following requirements:
● An available USB port
● 10 Mb free disk space for utility and driver installation
● Windows 98SE, 2000, Me, or XP
802.11g 54Mbps USB Adapter Installation
Prepare for installation
ATTENTION: You must install your software and drivers before you physically connect
the 802.11g 54Mbps USB Adapter.
Note: Your model number is 5422.
Note: For the most updated information, visit:
http://www.usr.com/support
Turn on your desktop or laptop computer. Type your password if you are prompted to
do so.
Note: Be sure to find out what letter your CD-ROM drive uses before you begin
installing your new product. You will need to know this to properly install your software.
Note: During the Installation procedure, you may be prompted for your Windows
Operating system CD-ROM. Make sure you have it available in case you need it.
Note: If the 802.11g 54Mbps USB Adapter does not fit into an available USB port on
your computer because of other USB devices that are connected, use an USB
extension cable or a USB hub to connect the 802.11g 54Mbps USB Adapter.
file:///C|/Arcadyan/USR/SW/English/three.html 第 1 頁 / 共 6 2004/9/15 下午 05:34:54