User's Manual

Configuring the Wireless Barricade Router

SSID: The Service Set ID. This should be set to the same value

as the other wireless devices in your network.

SSID Broadcast: Broadcasting the SSID on the wireless network

for easy connection with client PCs. For security reasons, you

should disable SSID broadcast. (Default: Enable)

Note: The SSID is case sensitive and can consist of up to 32

alphanumeric characters.

Wireless Mode: Set the communication mode for

the Router. Default: Mixed (11b+11g)

Transmission Rate: Set the rate of data

transmitted from the Router. The lower the data rate,

the longer the transmission distance. (Default: Fully

Automatic.)

Channel: The radio channel through which the Router

communicates with PCs in its BSS. (Default: 6)

Note: The available channel settings are limited by

local regulations.

g Nitro: In a crowded 2.4 MHz frequency, the

connection speed is much lower than the promised 54 Mbps. The

g Nitro implemented by Intersil’s Prism Nitro technology

dramatically enhances your wireless network speeds. It provides

up to 50% more throughput in 11g only environment, and

improves network throughput by 3 times in mixed mode.