User's Manual

C ONNECT THE S YSTEM
2-9
Connect the Power Adapter
Plug the power adapter into the power socket on the side panel of the
BARRICADE, and the other end into a power outlet.
Check the power indicator on the front panel is lit. If the power i
ndicator is
not lit, refer to
“Troubleshooting” on page A-1.
In case of a power input failure, the BARRICADE will automatically
restart and begin to operate once the input power is restored.
If the BARRICADE is properly configured, it will take about 30 seconds
to establish a connection with the ADSL service provider after powering
up.