User's Manual Part 2
Table Of Contents
- Troubleshooting
- Using Discovery
- IP Addressing
- Technical Specifications
- Safety Information
- End User Software License Agreement
- ISP Information
- Glossary
- 802.11b
- 802.11g
- 10BASE-T
- 100BASE-TX
- Access Point
- Ad Hoc mode
- Auto-negotiation
- Bandwidth
- Category 3 Cables
- Category 5 Cables
- Channel
- Client
- DHCP
- DNS Server Address
- DSL modem
- Encryption
- ESSID
- Ethernet
- Ethernet Address
- Fast Ethernet
- Firewall
- Full Duplex
- Router
- Half Duplex
- Hub
- IEEE
- IETF
- Infrastructure mode
- IP
- IP Address
- ISP
- LAN
- MAC
- MAC Address
- NAT
- Network
- Network Interface Card (NIC)
- Protocol
- PPPoE
- PPTP
- RJ-45
- Server
- SSID
- Subnet Address
- Subnet mask
- Subnets
- Switch
- TCP/IP
- Traffic
- universal plug and play
- URL Filter
- WAN
- WECA
- WEP
- Wi-Fi
- Wireless Client
- Wireless LAN Service Area
- Wizard
- WLAN
- WPA
- Glossary
- Regulatory Notices for the 11g Cable/DSL Router
Firewall 67
Figure 50
Other Applications Setup Screen
3 Click Add to save your settings.
Only one computer on your network can use the special application at
any one time.
PC Privileges
Figure 51 PC Privileges Screen
Select PC Privileges to display the PC Privilege setup screen (Figure 51).
Access from the local network to the Internet can be controlled on a
computer-by-computer basis. In the default configuration the Router will
allow all connected computers unlimited access to the Internet.
PC Privileges allows you to assign different access rights for different
computers on your network.