User's Manual Part 2

62 CHAPTER 5: ROUTER CONFIGURATION
6 Enter your PPP over Ethernet service name in the PPPoE Service Name text
box. Not all ISPs require a PPPoE service name. Only enter a service name
if your ISP requires this.
7 Select an idle time from the Maximum Idle Time drop-down list.
This value will correspond to the amount of idle time (no Internet activity)
that will pass before the Router automatically ends your PPP over
Ethernet session.
Since the Router contains its own PPPoE client, you no longer need to run
PPPoE client software on your computer to access the Internet.
PPTP
Figure 44 PPTP Setup Screen
To setup the Router for use with a PPTP connection, use the following
procedure:
1 Select PPTP (used by some European providers) in the IP Allocation Mode
field. (Figure 44
)
2 Enter your PPTP server address in the PPTP Server Address text box (this is
typically the address of your modem).
3 Enter your PPTP user name in the PPTP User Name text box.
4 Enter your password in the PPTP Password text box.